SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Machine stone

KHU-CON-0341

Australian Equivalent

CPCCST3006

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to machine stone. It includes operating static machines to carry out machining of stone. This unit applies to stonemasons who work independently, in a team or under supervision and operate machinery relating to stone work in a workshop setting, on a new site or an existing structure. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan the work.

0341.E1.O1Source and read machine stone requirements from specification, standards and codes.

0341.E1.O2Follow requirements in workplace safety and environmental documentation and workplace procedures relevant to work activity.

0341.E1.O3Determine job priorities and sequence job tasks in consultation with others on site.

0341.E1.O4Identify potential hazards and determine and implement control measures.

0341.E1.O5Select and check condition of plant, equipment and tools and report damage or malfunction to relevant personnel.

0341.E1.O6Check conformity of materials against the job requirements.

E2Prepare machinery for use.

0341.E2.O1Select, fit correctly and use personal protective equipment (PPE) appropriate for job.

0341.E2.O2Check guards, guides, clamps and sliding tables are fitted correctly and are operational.

0341.E2.O3Check electrical leads are tagged, and hoses and cables are not damaged

0341.E2.O4Conduct a pre-operation check and test emergency shut down switch is working.

0341.E2.O5Clean work area and remove any hazards.

E3Operate static diamond saw.

0341.E3.O1Locate, secure and stabilise stone on sliding table and align to blade for cutting.

0341.E3.O2Adjust depth of cut to suit stone hardness and blade cutting capacity.

0341.E3.O3Start saw and turn on water.

0341.E3.O4Slide stone through blade at an efficient rate avoiding strain on the machine and maintaining design.

0341.E3.O5Repeat process until depth of cut is achieved.

E4Operate a travelling beam saw.

0341.E4.O1Locate, align and secure stone on sliding table.

0341.E4.O2Enter setting into digital panel for width and depth of stone and limits of blade.

0341.E4.O3Switch on and operate automatic machine.

E5Operate multi-function cutter, grinder and polisher.

0341.E5.O1Select, fix and secure head/plate to operating spindle.

0341.E5.O2Locate and secure stone on cutting table.

0341.E5.O3Set template into position for profile work, cutting, and moulding operations.

0341.E5.O4Set cutting heads for initial cut and align with template as part of the operating process.

0341.E5.O5Carry out machine operations to complete the process of machining stone.

E6Carry out grinding and polishing.

0341.E6.O1Select and fit grinding plate appropriate to stone surface to be cut and polished.

0341.E6.O2Set up and operate machine for grinding and polishing process changing grit abrasive pads for type of stone and finish.

0341.E6.O3Monitor and maintain water flow to the polishing application.

E7Shut down machine operations.

0341.E7.O1Shut down machine and remove stone.

0341.E7.O2Remove, clean, check for wear and store clamps, wedges and supporting materials.

0341.E7.O3Clean machine, check for wear and tear or damage.

0341.E7.O4Report any malfunctions or damage to appropriate person.

E8Clean up.

0341.E8.O1Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.

0341.E8.O2Clean tools and equipment, check for serviceability and report damage or faults.

0341.E8.O3Store and secure tools and equipment following workplace procedures.