Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Turn stone

KHU-CON-0342

Australian Equivalent

CPCCST3007

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to turn stone. It includes setting up and using machinery, turning stone and finishing surfaces. This unit applies to stonemasons who work independently, in a team or under supervision and operate machinery relating to stone work in a workshop setting, on a new or existing structure. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0342.E1.O1Read and interpret turn stone requirements from specifications, standards, codes and job requirements.

0342.E1.O2Follow requirements in workplace safety and environmental documentation and workplace procedures.

0342.E1.O3Determine job priorities and sequence job tasks in consultation with others on site.

0342.E1.O4Identify potential hazards and determine and implement control measures.

0342.E1.O5Select and check condition of plant, equipment, tools and personal protective equipment (PPE), and report damage or faults to relevant person.

0342.E1.O6Check conformity of materials against job requirements.

E2Construct templates.

0342.E2.O1Select, fit correctly and use personal protective equipment (PPE) appropriate for job.

0342.E2.O2Select template material appropriate for the task.

0342.E2.O3Set out, mark design and cut to shape.

0342.E2.O4Apply template throughout the roughing out and finishing process.

E3Operate lathe and turn stone.

0342.E3.O1Identify specific features and application of the lathe relevant to task requirements.

0342.E3.O2Calculate machine speeds and feed rates and conduct a pre-operation check.

0342.E3.O3Read job sheet and select, prepare and fit specified lathe cutting tools.

0342.E3.O4Align talk stock accurately ready for operation.

0342.E3.O5Calculate and set roughing and finishing areas.

0342.E3.O6Secure stone and check holding devices are applied during a dry run check.

0342.E3.O7Perform lathe operation systematically checking contour matches template.

E4Finish and seal stone.

0342.E4.O1Check conformity against template, turn stone and finish surface.

0342.E4.O2Remove work from lathe, clean and prepare for sealant.

0342.E4.O3Apply sealant and compounds to finished stone.

0342.E4.O4Store chemical products safely in lock up cabinet.

E5Clean up.

0342.E5.O1Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.

0342.E5.O2Clean tools and equipment, check for serviceability and report damage or faults.

0342.E5.O3Store and secure tools and equipment following workplace procedures.