SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Build stone veneer walls

KHU-CON-0346

Australian Equivalent

CPCCST3012

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to build single leaf stone block face walls to a metal or timber wall frame construction. This unit applies to stonemasons who work independently, in a team or under supervision to build stone veneer walls relating to stonemasonry work on a new or existing structure. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Prepare for work.

0346.E1.O1Read, interpret and apply stone veneer construction requirements from current plans, specifications, standards and codes.

0346.E1.O2Follow relevant information from workplace procedures, workplace safety and environmental documentation.

0346.E1.O3Use measurements and formulas to calculate material quantities.

0346.E1.O4Determine job priorities and sequence job tasks in consultation with others on site.

0346.E1.O5Identify potential hazards and implement control measures.

0346.E1.O6Select and check condition of plant, equipment and tools and report damage or faults to relevant person.

0346.E1.O7Check conformity of materials against the job requirements.

E2Set out stone veneer work.

0346.E2.O1Select, fit correctly and use personal protective equipment (PPE) appropriate for job.

0346.E2.O2Identify structural details of stone veneer construction from plans and specifications.

0346.E2.O3Establish overall height and levels from datum.

0346.E2.O4Set out stonework dimensions and bond and mark on footing.

0346.E2.O5Set out door and window openings, stone gauge and damp proof course (DPC).

E3Construct base.

0346.E3.O1Select, blend and place materials in preparation for the work.

0346.E3.O2Mix mortar for consistency and job requirements and place on mortar boards ready for use.

0346.E3.O3Lay base stonework level and plumb to set out marks.

E4Construct stone veneer walls

0346.E4.O1Check structural frame for plumb, straight and no protrusions to maintain consistent cavity size.

0346.E4.O2Install reflective foil to meet building code and Australian standards.

0346.E4.O3Lay stone masonry work installing DPC and flashings, ventilation, weep holes and fix wall ties to framework.

0346.E4.O4Construct opening and install flashings maintaining clean cavity from mortar dropping and bridging.

0346.E4.O5Set out, erect, stabilise and brace work platform to workplace safety requirements.

0346.E4.O6Install lintels and head flashings to openings.

0346.E4.O7Finish stone veneer walls level, plumb and parallel to eaves height.

0346.E4.O8Locate and form control joints and stone work reinforcing as specified.

0346.E4.O9Cut and lay sill bricks to a line as specified.

E5Rake and rule joints.

0346.E5.O1Remove excess mortar from stonework.

0346.E5.O2Rake or rule joints to specified profile and depth.

0346.E5.O3Clean face of stonework prior to mortar drying.

E6Clean up

0346.E6.O1Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.

0346.E6.O2Clean tools and equipment, check for serviceability and report damage or faults.

0346.E6.O3Store and secure tools and equipment following workplace procedures.