Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Set and anchor stone facades

KHU-CON-0348

Australian Equivalent

CPCCST3014

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to shift, set and anchor a variety of stone facades for construction projects. This unit applies to stonemasons who work independently or in a team to set and anchor stone facades relating to stonemasonry work on a new or existing structure. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan the work.

0348.E1.O1Read, interpret and apply fixing stone facade requirements from current plans, specifications, standards and codes.

0348.E1.O2Follow relevant information from workplace procedures, workplace safety and environmental documentation.

0348.E1.O3Use measurements and apply formulas to calculate material quantities for the task.

0348.E1.O4Determine job priorities and sequence job tasks in consultation with others on site.

0348.E1.O5Identify potential hazards and determine and implement control measures.

0348.E1.O6Select and check condition of plant, equipment and tools and report damage or malfunction to relevant person.

E2Prepare for work.

0348.E2.O1Select, fit correctly and use personal protective equipment (PPE) appropriate for job.

0348.E2.O2Check conformity of materials against the specifications.

0348.E2.O3Set out stone facade dimensions, line and level from datum and establish base course.

0348.E2.O4Prepare area of construction to receive stone components.

0348.E2.O5Prepare surface and install base dowels to provide key for base course.

0348.E2.O6Check stone for faults; stone components are prepared, lifting locations are undamaged, and lifting gear is attached.

E3Shift, erect and fix stone.

0348.E3.O1Erect scaffolding as required in accordance with workplace safety requirements.

0348.E3.O2Select slings, clutches and lifting equipment for their correct function and inspect for wear and tear or damage.

0348.E3.O3Shift and transfer stone components to fixing location at structure.

0348.E3.O4Prepare base components by drilling holes for dowels and placing wedges or packers for adjustment.

0348.E3.O5Place and fix base course components; align and tie to stone components, and adjust and secure.

0348.E3.O6Install, join and fix stone facades and corners using appropriate fixing methods.

0348.E3.O7Flash, seal and caulk stone facade using recommended products.

0348.E3.O8Clean joins and stone face.

E4Clean up.

0348.E4.O1Clear the work area, and dispose of, reuse or recycle following workplace and environmental requirements.

0348.E4.O2Clean tools and equipment, check for serviceability and report damage or faults.

0348.E4.O3Store and secure tools and equipment following workplace procedures.