SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Build solid stonemasonry walls

KHU-CON-0350

Australian Equivalent

CPCCST3016

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to build stonemasonry solid walls. It includes installing damp proofing and flashing. This unit applies to stonemasons who work independently or in a team to build solid stonemasonry walls on a new or existing structure. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0350.E1.O1Read, interpret and apply solid stonemasonry wall construction requirements from current plans, specifications, standards and codes.

0350.E1.O2Follow relevant information from workplace procedures, workplace safety and environmental documentation.

0350.E1.O3Use measurements and formulas to calculate material quantities.

0350.E1.O4Determine job priorities and sequence job tasks in consultation with others on site.

0350.E1.O5Identify potential hazards and determine and implement control measures.

0350.E1.O6Select and check condition of plant, equipment and tools and report damage or malfunction to relevant person.

0350.E1.O7Check conformity of materials against the specifications and place materials in proximity of the work.

E2Set out stonework.

0350.E2.O1Select, fit correctly and use personal protective equipment (PPE) appropriate for job.

0350.E2.O2Identify structural details, loadbearing stonework and piers for stonework construction.

0350.E2.O3Establish finish heights and levels from datum and set out and mark base stonework.

0350.E2.O4Set out stonework gauge and bond.

0350.E2.O5Set out and mark load bearing stonework, damp proof course (DPC), flashing, ventilation, vermin proofing and ant capping.

0350.E2.O6Set out door and window positions to suit gauge and bond.

E3Construct solid masonry walls.

0350.E3.O1Mix mortar to colour and consistency of job requirements.

0350.E3.O2Lay base stones and construct to set out position and to level and bond.

0350.E3.O3Construct sold stonemasonry walls straight, level and plumb to allowable tolerances and with required wall ties.

0350.E3.O4Install DPC, flashings, weep holes and ventilation to comply with standards and codes.

0350.E3.O5Set out, erect, stabilise and brace work platform to workplace safety requirements.

0350.E3.O6Construct window and door openings and install flashings.

0350.E3.O7Install lintels and head flashings.

0350.E3.O8Install roof tie down to meet specifications and standards.

0350.E3.O9Set out, cut and lay sill bricks with specified slope and clearances.

E4Finish stonework.

0350.E4.O1Remove excess mortar prior to drying.

0350.E4.O2Rake or rule joints to specified profile and depth.

0350.E4.O3Bruch down and clean face stonework.

E5Clean up.

0350.E5.O1Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.

0350.E5.O2Clean tools and equipment, check for serviceability and report damage or faults.

0350.E5.O3Store and secure tools and equipment following workplace procedures.