Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Produce reconstituted stone

KHU-CON-0354

Australian Equivalent

CPCCST3020

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to produce reconstituted stone. It includes creating and using moulds, mixing and pouring selected materials and finishing selected surfaces. This unit applies to stonemasons who work independently or in a team to produce reconstituted stone relating to stonemasonry work in a workshop setting, on a new or existing structure. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply t

Elements & Learning Outcomes

E1Plan and prepare.

0354.E1.O1Read, interpret and apply reconstituted stone requirements from current job specifications, standards and codes.

0354.E1.O2Follow relevant information from workplace procedures, workplace safety and environmental documentation.

0354.E1.O3Use formulas to calculate material quantities for job requirements.

0354.E1.O4Determine job priorities and sequence job tasks in consultation with others on site.

0354.E1.O5Identify potential hazards and determine and implement control measures.

0354.E1.O6Select and check condition of plant, equipment and tools and report damage or faults to relevant person.

0354.E1.O7Check conformity of materials against the specifications.

E2Produce reconstituted stone

0354.E2.O1Select, fit correctly and use personal protective equipment (PPE) appropriate for job.

0354.E2.O2Prepare forms and existing moulds ready for placement of aggregate mix according to job requirements.

0354.E2.O3Place forms flat and in wind, and place reinforcement as specified.

0354.E2.O4Measure and mix aggregates and ingredients to the required consistency.

0354.E2.O5Fill forms with mixed aggregate and consolidate mix using light vibration.

0354.E2.O6Screed mix flat in line with top of forms, compact and allow to cure.

0354.E2.O7Remove reconstituted stone from form manually or by mechanical means and position for grinding.

0354.E2.O8Grind face of stone thoroughly to expose aggregate.

0354.E2.O9Fill voids or imperfections evenly matching stone and aggregate colour.

0354.E2.O10Polish surface to produce a flat and freeform blemish finish.

E3Clean up

0354.E3.O1Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.

0354.E3.O2Clean tools and equipment, check for serviceability and report damage or faults.

0354.E3.O3Store and secure tools and equipment following workplace procedures.