SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Restore stone work

KHU-CON-0355

Australian Equivalent

CPCCST3021

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to restore stonework. It includes preparing and positioning new stone and reproducing decorative stone. This unit applies to stonemasons who work independently or in a team to restore stone relating to stonemasonry work in a workshop setting, on a new or existing structure. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0355.E1.O1Read, interpret and apply stone work renovation and restoration requirements from work instructions, current plans, specifications, standards and codes.

0355.E1.O2Follow relevant information from workplace procedures and workplace safety and environmental documentation.

0355.E1.O3Calculate material and product quantities required for the task.

0355.E1.O4Determine job priorities and sequence job tasks in consultation with others on site.

0355.E1.O5Identify potential hazards and determine and implement control measures.

0355.E1.O6Select and check condition of plant, equipment and tools and report damage or faults to relevant personnel.

0355.E1.O7Check conformity of materials against the job requirements.

E2Access and remove damaged stonework.

0355.E2.O1Select, fit correctly and use personal protective equipment (PPE) appropriate for job.

0355.E2.O2Identify location and dimension of damaged stonework from job drawings.

0355.E2.O3Determine the extent of damage and scale of repair required.

0355.E2.O4Cut out damaged section accurately without damage or collapse to surrounding stone.

0355.E2.O5Remove and dispose of waste materials.

E3Prepare replacement stone.

0355.E3.O1Match colour and type of existing stone, seek advice if sourced stone is not compliant.

0355.E3.O2Measure profile dimensions of damaged stone and make templates.

0355.E3.O3Prepare replacement stone to accurately match dimensions and profile of removed stone.

E4Fix replacement stone.

0355.E4.O1Prepare stone for fixing using a slotted, doweled or bracket method.

0355.E4.O2Handle and raise stone into position for placement.

0355.E4.O3Place and fix stone into exact position and bed stone using adhesive or mortar.

0355.E4.O4Fill bed and perpendicular joints with mortar or sealant.

0355.E4.O5Clean stonework using dry, liquid or chemical method.

E5Reproduce decorative carving work.

0355.E5.O1Make templates to match damaged decorative stone carving.

0355.E5.O2Select stone to match colour and grain of existing stone.

0355.E5.O3Apply and mark carving templates to stone to show bulk areas to be removed.

0355.E5.O4Remove bulk areas of stone to allow for pattern marking.

0355.E5.O5Reapply carving template, mark details and use appropriate methods to complete stone carving.

0355.E5.O6Place, fix and bed decorative carved stone and inspect for quality of finish.

E6Clean up.

0355.E6.O1Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.

0355.E6.O2Clean tools and equipment, check for serviceability and report damage or faults.

0355.E6.O3Store and secure tools and equipment following workplace procedures.