Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Construct a fire brick wall and arch using refractory materials

KHU-CON-0366

Australian Equivalent

CPCCST4007

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to construct a brick wall and arch using refractory materials, including castables, bricks and insulation. It covers the application of the unique skills and knowledge relevant to refractory work. The unit of competency supports specialist and advanced tradespersons working in refractory bricklaying. It may be applied in the construction or repair of various fire resistant structures, including boilers, kilns and industrial furnaces. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Set out and prepare the base location of work.

0366.E1.O1Set out location of the brickwork to position in accordance with job specifications and drawings.

0366.E1.O2Prepare base location so that the surface is dry, horizontal, clean and flat, and in accordance with job specifications.

E2Lay brickwork.

0366.E2.O1Apply fire clay to bricks to maintain joints at the specified thickness.

0366.E2.O2Ensure bricks are in the required bond and set out, method and line, level and plumb in accordance with job specifications and drawings.

0366.E2.O3Cut bricks to the correct length to maintain the required bond in accordance with manufacturer recommendations and job specifications.

0366.E2.O4Complete brickwork and remove surplus fire clay to specification requirements.

E3Form a segmental arch.

0366.E3.O1Identify span and rise of the arch and locate in accordance with job plans and specifications.

0366.E3.O2Place adjustable props appropriately to support the timber arch centre and adjust as necessary.

0366.E3.O3Establish and mark position of the central key brick for easy identification.

E4Cut and lay bricks to position around the arch.

0366.E4.O1Cut and lay bricks on the centre to form an arch to specifications.

0366.E4.O2Maintain same sized wedge shape brick throughout the construction of the arch.

0366.E4.O3Monitor and adjust measurements and placement of bricks accordingly to ensure accurate application of job requirements.

E5Complete and review finished work.

0366.E5.O1Remove props and other support materials.

0366.E5.O2Finish and clean construction to meet job requirements and professional expectations.

0366.E5.O3Clean intrados of the arch and repoint with mortar as necessary.