Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Complete penetrations and flashings

KHU-CON-0372

Australian Equivalent

CPCCWC2001

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to complete the penetrations and flashings associated with wall and ceiling lining, meeting all relevant requirements of Australian Standards, work health and safety (WHS) requirements, and Commonwealth and state or territory legislation. It does not cover the technical aspects of passive fire systems. The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0372.E1.O1Read and interpret work instructions and plan sequence of work.

0372.E1.O2Select and use personal protective equipment (PPE) as required for each stage of the task.

0372.E1.O3Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0372.E1.O4Follow requirements of job safety analyses and safety data sheets.

0372.E1.O5Inspect work site, locate services, assess hazards and apply risk controls, including required signage and barricades.

0372.E1.O6Select tools and equipment, check for serviceability and report any faults.

E2Confirm penetration and flashing requirements.

0372.E2.O1Select type of penetration and flashing to match host materials and meet work instructions.

0372.E2.O2Identify, set out and check penetration location in accordance with workplace requirements.

E3Complete penetration and flashing.

0372.E3.O1Create penetration safely and with minimal modification or damage to host materials.

0372.E3.O2Install flashing safely and with minimal modification or damage to host materials.

0372.E3.O3Install and connect casings, housings or other terminating points in accordance with workplace and regulatory requirements.

0372.E3.O4Apply sealant or caulking compound to restore integrity of wall or ceiling system in accordance with manufacturers’ recommendations.

0372.E3.O5Prepare surfaces for finishing.

E4Clean up.

0372.E4.O1Clear work area, dispose of materials, and reuse or recycle in compliance with legislation, regulations and codes of practice.

0372.E4.O2Clean, check, maintain and store tools and equipment in accordance with manufacturers’ recommendations.