Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Install decorative tiling

KHU-CON-0383

Australian Equivalent

CPCCWF3005

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to locate and set out dimensions and plans for decorative tiling projects to form specific patterns. It includes advanced setting out and installation of decorative and heritage tiles. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. Licensing, legislative or certification requirements apply to this unit in some states and territories and users are advised to check with the relevant regulatory authority.

Elements & Learning Outcomes

E1Plan and prepare to install decorative tiling.

0383.E1.O1Read and interpret task work instructions and plan sequence of work.

0383.E1.O2Select and use personal protective equipment (PPE) as required for each stage of the task.

0383.E1.O3Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0383.E1.O4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

0383.E1.O5Select tools and equipment, check for serviceability and report any faults.

0383.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Form decorative design.

0383.E2.O1Inspect tiles to ensure conformance with the elements of the design, including colour, shape and geometry of the project.

0383.E2.O2Set out and lay out tiles to required shape and size for decorative design.

0383.E2.O3Cut tiles to complete the design set out.

0383.E2.O4Align tile joints, plumb and square, and position tiles.

E3Install tiles.

0383.E3.O1Prepare substrate surfaces.

0383.E3.O2Match and mix adhesive with tile and substrate material according to usage and climatic conditions.

0383.E3.O3Install tiles to designed set out.

0383.E3.O4Install and adjust border and/or decorative tiles to set out.

E4Grout tiles.

0383.E4.O1Clean and prepare joints to receive grout.

0383.E4.O2Mix and apply grout.

0383.E4.O3Clean and polish tiles.

0383.E4.O4Protect tiles from damage during remaining construction.

E5Clean up.

0383.E5.O1Clear work area and dispose of, reuse or recycle materials.

0383.E5.O2Clean, check, maintain and store plant, tools and equipment in accordance with manufacturers’ recommendations.