Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Tile curved surfaces

KHU-CON-0385

Australian Equivalent

CPCCWF3007

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to tile curved surfaces. It includes the preparation for and tiling of columns and arches. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. Licensing, legislative or certification requirements apply to this unit in some states and territories and users are advised to check with the relevant regulatory authority.

Elements & Learning Outcomes

E1Plan and prepare to tile curved surfaces.

0385.E1.O1Read and interpret task work instructions and plan sequence of work.

0385.E1.O2Select and use personal protective equipment (PPE) as required for each task stage.

0385.E1.O3Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0385.E1.O4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

0385.E1.O5Select tools and equipment, check for serviceability and report any faults.

0385.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Prepare and tile circular columns.

0385.E2.O1Calculate and establish extent of curve.

0385.E2.O2Use levelling equipment for intermediate marking to level line set out around the surface.

0385.E2.O3Make template/s to form an accurate curve line for tiled surface.

0385.E2.O4Calculate a balanced design and cut tiles to size.

0385.E2.O5Prepare substrate and compatible adhesive.

0385.E2.O6Install tiles to level set out, template curve and specifications.

0385.E2.O7Minimise voids in adhesive tile beds.

E3Prepare and tile arches.

0385.E3.O1Calculate and establish extent of arch and size of voussoirs at the intrados and the extrados.

0385.E3.O2Use levelling equipment and calculate springing line.

0385.E3.O3Cut tiles to size using template/s.

0385.E3.O4Prepare substrate and compatible adhesive.

0385.E3.O5Install voussoirs and returns to set-out.

0385.E3.O6Minimise voids in adhesive tile beds.

E4Grout tiles.

0385.E4.O1Clean and prepare joints to receive grout.

0385.E4.O2Mix and apply grout.

0385.E4.O3Clean and polish tiles.

0385.E4.O4Protect tiles from damage during remaining construction.

E5Clean up.

0385.E5.O1Clear work area and dispose of, reuse or recycle materials.

0385.E5.O2Clean, check, maintain and store plant, tools and equipment in accordance with manufacturers’ recommendations.