Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Handle waterproofing materials and components

KHU-CON-0389

Australian Equivalent

CPCCWP2001

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to safely handle and store waterproofing materials and components manually and mechanically, meeting all relevant requirements of Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. It includes the preparation, handling, sorting, stacking and disposal of waterproofing products, materials and components in the application of waterproofing systems. The unit is suitable for those with basic skills and knowledge undertaking routine waterproofing tasks under the direction of more experienced workers. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requireme

Elements & Learning Outcomes

E1Plan and prepare to handle waterproofing materials and components.

0389.E1.O1Read and interpret task work instructions and plan sequence of work.

0389.E1.O2Select and use personal protective equipment (PPE) as required for each stage of the task.

0389.E1.O3Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0389.E1.O4Follow handling requirements of job safety analyses and safety data sheets.

0389.E1.O5Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

0389.E1.O6Select tools and equipment, check for serviceability and report any faults.

0389.E1.O7Select materials required for the task.

E2Manually handle waterproofing materials.

0389.E2.O1Check materials and components for conformity to material schedule, plans and specifications.

0389.E2.O2Determine handling characteristics of waterproofing materials and components and apply safe and effective handling techniques.

0389.E2.O3Sort, store and position, and stack waterproofing materials and components.

0389.E2.O4Protect materials and components against physical damage and environmental impacts and store clear of traffic ways.

E3Prepare for mechanical handling of materials and components.

0389.E3.O1Prepare and position waterproofing materials and components for mechanical handling for the type of material/component and for the requirements of the equipment to be used.

0389.E3.O2Load, unload, move, locate and/or install materials and/or components safely with the assistance of mechanical lifting devices/hoists.

E4Handle and remove waste materials and clean up.

0389.E4.O1Handle waste waterproofing materials and components in accordance with safety data sheets and regulatory requirements.

0389.E4.O2Identify and locate hazardous material for separate handling.

0389.E4.O3Clear work area, dispose of materials, and reuse or recycle in compliance with legislation, regulations and codes of practice.

0389.E4.O4Use dust suppression procedures to minimise health risk to others.

0389.E4.O5Clean, check, maintain and store tools and equipment in accordance with manufacturers’ recommendations and WHS requirements.