Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Prepare surfaces for waterproofing application

KHU-CON-0391

Australian Equivalent

CPCCWP2004

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to repair and prepare different surfaces for the application of waterproofing, meeting all relevant requirements of Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. The unit is suitable for those with basic skills and knowledge undertaking routine waterproofing tasks. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare to prepare surfaces for waterproofing application.

0391.E1.O1Read and interpret work instructions and plan sequence of work.

0391.E1.O2Select and use personal protective equipment (PPE) as required for each stage of the task.

0391.E1.O3Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0391.E1.O4Follow requirements of job safety analyses and safety data sheets.

0391.E1.O5Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

0391.E1.O6Select tools and equipment, check for serviceability and report any faults.

0391.E1.O7Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Prepare work area.

0391.E2.O1Identify area to be waterproofed from plans and specifications.

0391.E2.O2Inspect and test surface to determine appropriateness of the installation and for any contaminants, moisture or incompatible materials.

0391.E2.O3Provide ventilation in accordance with safety data sheets.

0391.E2.O4Provide run-off and environmental controls to regulatory and workplace requirements.

0391.E2.O5Clean and prepare work area for the waterproofing processes to manufacturers’ specifications and site requirements.

E3Prepare substrate.

0391.E3.O1Assess surface for defects and report areas of concern.

0391.E3.O2Select tools to repair/prepare the surface.

0391.E3.O3Determine method of repairing surface defects, consistent with type of material surface, size of defect, compatibility of materials and specified finish.

0391.E3.O4Select, prepare and apply repair materials to manufacturers' specifications.

0391.E3.O5Prepare substrate for water proofing system.

0391.E3.O6Clean surface area of unwanted materials to provide a uniform surface.

0391.E3.O7Protect surface until the application of the waterproof membrane.

E4Clean up.

0391.E4.O1Clear work area, dispose of materials, and reuse or recycle in compliance with legislation, regulations and codes of practice.

0391.E4.O2Clean, check, maintain and store tools and equipment in accordance with manufacturers’ recommendations.