MLVT
SKILLS PORTAL
ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board
អត្តសញ្ញាណប័ណ្ណសិក្សាអាស៊ីអាគ្នេយ៍ការរៀនសូត្រពេញមួយជីវិត • អធិបតេយ្យដោយការរចនាSEALSOUTH EAST ASIA LEARNING IDENTIFIERកម្ពុជា២០២៦
54
Sector Frameworks
1,164
Qualifications
15,161
Competency Units
10,938
Elements
41,782
Learning Outcomes
2,822
Assessment Packages

Fabricate and assemble shopfront structures

KHU-CON-0575

Australian Equivalent
CPCSHP3002
Elements
6
Learning Outcomes
36

This unit of competency specifies the skills and knowledge required to set out, fabricate and assemble internal and external entries for shopping centres, commercial and industrial buildings. It includes off-site assembly of the structure to ensure correct fit and to allow for preparation for transport. It applies to shopfitters who fabricate street fronts, bulk heads and entries that form a total shopfront structure for all applications. Individuals at this level take responsibility for organising and completing these tasks with a high degree of self-direction. Licensing, legislative or certification requirements may apply to this unit of competency in some states and territories. Relevant state and territory regulatory authorities should be consulted to confirm those requirements. Completion of the general construction induction training program, specified in the Safe Work Australia mo

Elements & Learning Outcomes

6
E1Undertake on-site measurements
0575.E1.O1Identify, read and interpret work plans and specification to confirm job requirements.
0575.E1.O2Implement on-site work health and safety requirements.
0575.E1.O3Locate on-site datum, gridlines and reference points from site plan.
0575.E1.O4Use levelling techniques to check surrounding structures and surfaces for plumb, level, line and square.
0575.E1.O5Measure and record internal width and height dimensions.
0575.E1.O6Mark position of proposed frames and fittings on surrounding structure using non-permanent marker.
0575.E1.O7Note, rectify and report inconsistencies to appropriate person in dimensions, layout or location of structure outside the specified tolerances.
0575.E1.O8Notify glazier of site measurements for glass.
E2Plan and prepare for the project.
0575.E2.O1Inspect and identify offsite work area hazards and conditions and implement risk control measures.
0575.E2.O2Prepare detailed working drawings from design drawings to comply with job requirements.
0575.E2.O3Prepare an efficiency cutting plan and list and calculate materials for the project.
0575.E2.O4Determine job priorities and sequence job tasks in consultation with others in the workplace.
0575.E2.O5Select, fit and use personal protective equipment (PPE) required for the task.
0575.E2.O6Identify, obtain, safely handle, prepare and locate materials ready for use.
0575.E2.O7Set out components following workplace procedures.
0575.E2.O8Select tools and equipment and check for serviceability.
0575.E2.O9Conduct a pre-start check and rectify and report faults.
E3Fabricate project components.
0575.E3.O1Produce specified components using static machines in accordance with job and organisational quality requirements.
0575.E3.O2Program CNC machine to manufacturer and produce specified components.
0575.E3.O3Test CNC machine program operations in dry run simulation mode, and edit program and alarm settings as required, using the control station.
0575.E3.O4Recognise minor faults and problems with CNC machine operation, and select and apply appropriate action to overcome issues and meet project schedules.
0575.E3.O5Produce specified work pieces using CNC machine automatic mode.
0575.E3.O6Cut straight and curved lines in small sections of glass.
0575.E3.O7Check components for correct measurements and compliance with quality and job requirements.
E4Assemble components of shopfront structure.
0575.E4.O1Select appropriate area to lay out and assemble material components.
0575.E4.O2Use appropriate fixings and fasteners to assemble frame and check overall dimension for conformity with location and design.
0575.E4.O3Check frame for parallel and square and adjust as required.
0575.E4.O4Laminate required areas and fix fittings to components.
0575.E4.O5Assemble shopfront free of scratches, dents, blemishes and damage.
E5Prepare for transport to worksite.
0575.E5.O1Disassemble shopfront components that are too large for transport to worksite or too heavy for safe lifting, into smaller sections.
0575.E5.O2Identify and arrange packaging requirements for separate components and sections.
0575.E5.O3Label and place components and sections in an appropriate workplace area in preparation for collection and transport to site.
0575.E5.O4Number assembly diagram and locate for inclusion in delivery instructions.
E6Clean up.
0575.E6.O1Clean CNC and static machinery, tools and equipment, check for serviceability and report damage or faults.
0575.E6.O2Clear work area and dispose of, reuse or recycle materials following workplace and environmental requirements.
0575.E6.O3Store and secure tools and equipment following workplace procedures.
About the Skills PortalPrivacy Policy
SEAL — South East Asia Learning Identifier & Skills Portal · Prepared for MLVT Executive approval and TVET institute review · Derived from the Australian National Training Register (training.gov.au, CC-BY) and aligned to the Cambodian Qualifications Framework and DSC Standard Training Packages · Delivered via Gibble SMS · July 2026