Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Install internal shop walls and fixtures

KHU-CON-0581

Australian Equivalent

CPCSHP3008

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to prepare, set out and install wall frames, partitions and wall linings to areas such as fitting or treatment rooms in internal shop areas. It includes fitting doors and windows, fixing mouldings and installing fixtures. It applies to shopfitters engaged in creating new shops or renovating existing shops. The work is completed onsite concurrently with other shopfitting work that must be scheduled to accommodate client requirements, the shop when it is operational, and the requirements of other shopfitters and associated contractors. Individuals at this level take responsibility for organising and completing these tasks with a high degree of self-direction. No licensing, legislative or certification requirements apply to this unit of competency at the time of publication. Completion of the general construction induction

Elements & Learning Outcomes

E1Plan and prepare to install internal shop walls and fixtures.

0581.E1.O1Read and interpret plans and specifications to confirm job requirements.

0581.E1.O2Interpret and apply organisational quality assurance requirements appropriate for the project.

0581.E1.O3Determine material type and calculate quantities to complete the task.

0581.E1.O4Determine job priorities and sequence job tasks in consultation with others in the workplace to ensure timeframes are met.

0581.E1.O5Inspect worksite conditions, identify hazards and implement risk control measures following work health and safety requirements and environmental practices.

0581.E1.O6Select, fit and use personal protective equipment (PPE) for the task.

0581.E1.O7Select tools and equipment for the task.

0581.E1.O8Check for serviceability and rectify and report faults.

0581.E1.O9Receive and check delivered materials for completeness and conformity with job requirements and identify and report any discrepancies or damage.

0581.E1.O10Place materials in a safe and secure position ready for use.

E2Install internal wall framing and lining.

0581.E2.O1Set out Internal wall framing parallel and square to existing structure.

0581.E2.O2Set out frame with door and window openings, cut frame members and assemble ready to erect.

0581.E2.O3Stand frame into position, level, square and plumb and use appropriate fixing method and fastenings appropriate for the existing structure.

0581.E2.O4Mark and cut lining material to length, and shape and fix to frame to meet job requirements.

E3Install partitions.

0581.E3.O1Set out and mark position of pre-assembled or onsite assembled partitions to plan dimensions.

0581.E3.O2Cut partition components accurately to size and locate connection points.

0581.E3.O3Install and secure each component junction tight together and flush with face using specified fixings and fastenings.

0581.E3.O4Secure, square and plumb assembled partitions within accepted industry tolerances.

E4Cut and fix decorative mouldings.

0581.E4.O1Mark, cut to length, fit and fix specified mouldings.

0581.E4.O2Fit and fix mitre joints flush to face and true.

0581.E4.O3Mark and cut to length scribed joints.

0581.E4.O4Set out, mark and fix specified fixtures.

E5Clean up.

0581.E5.O1Clear work area and dispose of, reuse or recycle materials following workplace and environmental requirements.

0581.E5.O2Clean tools and equipment, check for serviceability and report damage or faults.

0581.E5.O3Store and secure tools and equipment following workplace procedures.