Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Prepare shop floors for new coverings

KHU-CON-0583

Australian Equivalent

CPCSHP3010

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to remove existing shop floor coverings and prepare and apply primer and cementitious products to patch and smooth shop floors ready for the installation of new selected floor coverings. It applies to those who work in new or existing retail environments where shopfitters need to prepare concrete or timber floors using smoothing and skim coating techniques. The unit supports shop floor preparation work which is completed onsite and may be undertaken concurrently with other shopfitting work. Where the shop is operational, work is scheduled to accommodate client requirements and coordinate with other shopfitters and associated contractors. Individuals at this level take responsibility for organising and completing these tasks with a high degree of self-direction. No licensing, legislative or certification requirements appl

Elements & Learning Outcomes

E1Plan and prepare shop floors.

0583.E1.O1Identify, read and interpret shop floor preparation and coverings from plans and specifications and confirm against job requirements.

0583.E1.O2Interpret and apply organisational quality assurance requirements appropriate for scope of work.

0583.E1.O3Calculate materials required to prepare shop floors for new coverings.

0583.E1.O4Determine job priorities and sequence job tasks in consultation with others in the workplace to ensure work is completed within given timeframes.

0583.E1.O5Inspect workplace conditions, identify hazards and apply risk control measures to meet work health and safety and environmental requirements.

0583.E1.O6Select, fit and use personal protective equipment (PPE) for the task.

0583.E1.O7Select plant, tools and equipment suited to shop floor preparation work.

0583.E1.O8Check for serviceability and rectify and report faults.

E2Remove existing shop floor coverings.

0583.E2.O1Select starting point to ensure entry and exit access is available during removal process.

0583.E2.O2Lift sections of floor coverings following job specifications and stack existing removed and rolled floor coverings in preparation for removal.

0583.E2.O3Remove and dispose of existing floor coverings using safe manual handling techniques.

0583.E2.O4Clear remnants of floor coverings or fixings from exposed sub-floor surface.

E3Apply floor surface covering.

0583.E3.O1Clean sub-floor surfaces following manufacturer recommendations.

0583.E3.O2Apply trial applications of primer and smoothing compound to the sub-floor.

0583.E3.O3Confirm suitability and compatibility of primer, smoothing and levelling compounds, and review and retrial until job requirements are met.

0583.E3.O4Apply surface covering to required floor area ensuring specified depth and coverage is achieved.

0583.E3.O5Check surfaces for contamination, moisture content and suitability of finish, and complete rectification to meet job requirements.

0583.E3.O6Seal and store unused products following workplace and environmental requirements.

E4Clean up.

0583.E4.O1Clear work area and dispose of, reuse or recycle materials following workplace and environmental requirements.

0583.E4.O2Clean and maintain tools and equipment, and rectify and report faults.

0583.E4.O3Store and secure tools and equipment following workplace procedures.