Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Design, install and verify compliance and functionality of general electrical installations

KHU-ELT-0253

Australian Equivalent

UEEEL0039

Elements

Learning Outcomes

This unit involves the skills and knowledge required to design, install, inspect and test to verify an electrical installation is safe and complies with regulatory requirements. It includes working safely; designing, installing, commissioning and fault finding of electrical installations; visual inspections and mandatory testing; following workplace procedures; and completing mandatory reporting requirements. The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Au

Elements & Learning Outcomes

E1Prepare to design, install, inspect and test an electrical installation

0253.E1.O1WHS/OHS control measures for the site are identified and applied

E2Select wiring systems, cables, control and protection for general electrical installations

0253.E2.O1Wiring system is selected and suitable for the environments in which it will operate

E3Install low voltage (LV) wiring and associated accessories

0253.E3.O1Wiring and accessories are installed and terminated to comply with technical standards and job specifications and requirements

E4Install and connect LV appliances, switchgear and associated accessories

0253.E4.O1Appliances, switchgear and accessories are installed to comply with technical standards and job specifications and requirements with sufficient access to affect terminations, adjustment and maintenance

E5Visually inspect and conduct safety testing on electrical installation

0253.E5.O1Wiring is checked for suitability within the environments in which it is installed to ensure it is suitably protected from damage or overheating in accordance with relevant industry standards

E6Report inspection and test findings

0253.E6.O1WHS/OHS risk control work completion measures and procedures are followed