SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Apply structural principles to Class 10 buildings

KHU-AGR-0351

Australian Equivalent

AHCLSC403

Elements

Learning Outcomes

This unit of competency describes the skills and knowledge required to apply structural principles to the construction of National Construction Code (NCC) Class 10 buildings. The unit applies to individuals who apply specialist skills and knowledge to apply structural principles to the demolition or construction of Class 10 buildings. This includes applying and communicating non-routine technical solutions to predictable and unpredictable problems. All work is carried out to comply with workplace procedures, health and safety in the workplace requirements, legislative and regulatory requirements. State/territory licensing, legislative or certification requirements apply in some jurisdictions. Users are advised to check with the relevant regulatory authority.

Elements & Learning Outcomes

E1Analyse the structural integrity of building project

0351.E1.O1Determine class of building, intended use and climate zone from the NCC

0351.E1.O2Analyse project compliance with NCC bushfire, high wind, earthquake and alpine environment requirements

0351.E1.O3Analyse building design and structural integrity from plans and specifications, building construction codes and Australian Standards

0351.E1.O4Determine the effect of section properties on various materials

0351.E1.O5Determine if structural performance meets NCC general requirements and performance requirements

0351.E1.O6Confirm analysis with industry design and building construction professionals

0351.E1.O7Conduct pre-commencement site inspection to confirm analysis

0351.E1.O8Assess new and emerging building technologies for application to the construction process and compliance with NCC requirements and Australian Standards

E2Plan, coordinate and manage the laying of footings

0351.E2.O1Identify earthworks and footing or slab configuration from project plans and specifications

0351.E2.O2Establish cut and fill, excavation and compaction compliance with geotechnical report

0351.E2.O3Assess performance or reinforcement, concrete and other elements that contribute to structural integrity of specified footings

0351.E2.O4Determine compliance with building and construction regulations, standards and codes

0351.E2.O5Set out footings according to project plans and specifications

E3Plan, coordinate and manage the building of wall systems

0351.E3.O1Identify and analyse structural and non-structural wall systems used in the planning of the building and construction project

0351.E3.O2Determine materials used for timber and steel framing and structural steel members compliance with NCC performance requirements, and timber framing compliance with Australian Standards

0351.E3.O3Identify, implement and check processes for erecting structural and non-structural wall systems comply with manufacturer specifications and building and construction codes and Australian Standards

0351.E3.O4Plan, implement and check requirements for application of bracing, tie-downs, tolerances, allowances, and fixing and installation of wall frame components compliance with Australian Standards, codes and manufacturer specifications

0351.E3.O5Manage processes to ensure quality of the frame, whether factory pre-cut and pre-nailed, factory pre-cut and assembled on site, or cut and assembled on site

0351.E3.O6Identify and implement allowances for services to be installed

0351.E3.O7Check compliance of windows and doors installation with building and construction codes, Australian Standards and manufacturer specifications

E4Plan, coordinate and manage the building of structural roof systems

0351.E4.O1Identify type of structural roof system and components and determine compliance with NCC performance requirements

0351.E4.O2Plan, implement and check erection of structural roof, roof trusses or hand cut roof members compliance with building and construction codes, Australian Standards and accepted industry construction practices

0351.E4.O3Plan, implement and check installation of roof sarking and cladding, skylights, roof ventilators and service penetrations compliance with building and construction codes, Australian Standards and manufacturer specifications

0351.E4.O4Manage processes to ensure quality and finish of roof systems

E5Plan, coordinate and manage wall cladding

0351.E5.O1Assess structural performance of cladding to be used for bracing in the frame construction for compliance with building and construction codes, Australian Standards and manufacturer specifications

0351.E5.O2Determine cladding, vapour permeable sarking or waterproof membrane and components meet NCC performance requirements

0351.E5.O3Supervise and check installation of specified cladding compliance with building and construction codes, Australian Standards and accepted industry practices