Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Remove and replace vehicle and vessel seats and fittings

KHU-AUT-0571

Australian Equivalent

AURVTT009

Elements

Learning Outcomes

This unit describes the performance outcomes required to remove and replace seats and fittings of vehicles and vessels according to manufacturer removal and replacement instructions. It involves preparing for the task, selecting and using specialist tools and equipment, storing seats and fittings, and completing workplace processes and documentation. It applies to those working in the automotive and marine trimming industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Prepare to remove and replace seats and fittings

0571.E1.O1Job requirements are determined from workplace instructions

0571.E1.O2Removal and replacement information is sourced and interpreted

0571.E1.O3Hazards associated with the work are identified and risks are managed

0571.E1.O4Hand tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

0571.E1.O5Work area and storage racks are prepared according to workplace procedures

0571.E1.O6Work is planned to minimise waste and use time efficiently

E2Remove and replace seats and fittings

0571.E2.O1Seats and fittings are removed using manufacturer-approved methods, tools and equipment, according to safety and environmental requirements, and without causing damage to vehicle or components

0571.E2.O2Seats and fittings are stored safely until needed for replacement

0571.E2.O3Seats and fittings are replaced according to manufacturer replacement instructions and without causing damage to vehicle, ensuring all bolts and fasteners are used and tensioned

E3Complete work processes

0571.E3.O1Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

0571.E3.O2Authorised personnel are informed of work outcome according to workplace procedures

0571.E3.O3Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

0571.E3.O4Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

0571.E3.O5Workplace documentation is processed according to workplace procedures