SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Apply structural principles to residential and commercial constructions

KHU-CON-0013

Australian Equivalent

CPCCBC4010

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to apply structural principles to the construction of residential or commercial structures. This unit includes applying structural principles to footing, floor, wall and roof systems. It applies to National Construction Code (NCC) classifications: Residential - Class 1 and 10 buildings, maximum two storeys Commercial - Class 2 to 9, Type C only constructions. This unit of competency applies to builders, site managers, forepersons and other managers in the building and construction industry who apply structural principles to the demolition or construction of structures. This unit of competency is suitable for those using specialised knowledge to complete routine and non-routine tasks and using their own judgement to deal with predictable and sometimes unpredictable problems relating to building application approvals. Comp

Elements & Learning Outcomes

E1Analyse the structural integrity of building project.

0013.E1.O1Determine the class of building, intended use of building and climate zone from the NCC.

0013.E1.O2Analyse project for compliance with NCC bushfire, high wind, earthquake and alpine environment requirements.

0013.E1.O3Analyse building design and structural integrity from project plans and specifications, building standards and codes.

0013.E1.O4Determine the effect of section properties on various materials.

0013.E1.O5Determine if structural performance meets the General Requirements and Performance Requirements of NCC.

0013.E1.O6Confirm analysis with relevant industry professionals.

0013.E1.O7Conduct pre-commencement site inspection to confirm analysis.

0013.E1.O8Assess new and emerging building technologies for application to the construction process and their compliance with NCC requirements and relevant Australian Standards.

E2Plan, coordinate and manage the laying of footings.

0013.E2.O1Identify earthworks and footing or slab configuration from project plans and specifications.

0013.E2.O2Establish cut and fill, excavation and compaction compliance with geotechnical report.

0013.E2.O3Assess performance of reinforcement, concrete and other elements which contribute to structural integrity of specified footings.

0013.E2.O4Determine compliance with building and construction regulations, standards and codes.

0013.E2.O5Set out footings in accordance with project plans and specifications.

E3Plan, coordinate and manage laying of flooring systems.

0013.E3.O1Identify flooring systems materials, components and configuration from project plans and specifications.

0013.E3.O2Establish footing type and tie-down details.

0013.E3.O3Assess suspended flooring system component sections’ compliance with standards and codes’ span requirements.

0013.E3.O4Determine if floor framing and flooring is compliant with NCC Performance Requirements for climate zone, fire resistance and rising damp requirements.

0013.E3.O5Supervise and check laying of specified floor system complies with project documentation.

E4Plan, coordinate and manage the building of wall systems.

0013.E4.O1Identify and analyse structural and non-structural wall systems used in the planning of the building and construction project.

0013.E4.O2Determine materials used for timber and steel framing and structural steel members meet the Performance Requirements of the NCC and timber framing complies with AS 1684 Residential timber-framed construction.

0013.E4.O3Identify, implement and check processes for erecting structural and non-structural wall systems comply with manufacturer’s specifications and building and construction standards and codes.

0013.E4.O4Plan, implement and check requirements for application of bracing, tie-downs, tolerances, allowances, and fixing and installation of wall frame components for compliance with relevant Australian Standards, codes and manufacturer specifications.

0013.E4.O5Manage processes to ensure quality of the frame, whether factory pre-cut and pre-nailed, factory pre-cut and assembled on site, or cut and assembled on site.

0013.E4.O6Identify and implement allowances for services to be installed.

0013.E4.O7Check compliance of installation of windows and doors with building and construction standards and code and manufacturer’s specifications.

E5Plan, coordinate and manage the building of structural roof systems.

0013.E5.O1Identify type of structural roof system and components and determine compliance with Performance Requirements of NCC.

0013.E5.O2Plan, implement and check erection of structural roof, roof trusses or hand cut roof members comply with building and construction standards and codes and accepted industry construction practices.

0013.E5.O3Plan, implement and check installation of roof sarking and cladding, skylights, roof ventilators and service penetrations comply with building standards, codes and manufacturer specifications.

0013.E5.O4Manage processes to ensure roof systems’ quality finish.

E6Plan, coordinate and manage wall cladding.

0013.E6.O1Assess structural performance of cladding to be used for bracing in the frame construction for compliance with building and construction standards, codes and manufacturer specifications.

0013.E6.O2Determine cladding, vapour permeable sarking or waterproof membrane and components meet the Performance Requirements of NCC.

0013.E6.O3Supervise and check installation of specified cladding complies with building and construction standards, codes and industry-accepted industry practices.