Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Construct eaves

KHU-CON-0112

Australian Equivalent

CPCCCA3008

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to prepare, set out and construct eaves, including the cutting and fixing of fascia and barges to provide a finish between the wall and the roof, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. The unit includes: construction of boxed and raked eaves finishing of gable ends including verge and flush. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0112.E1.O1Read and interpret work instructions and plan sequence of work.

0112.E1.O2Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0112.E1.O3Select tools and equipment, check for serviceability and report any faults.

0112.E1.O4Select and use personal protective equipment (PPE) as required for each stage of the task.

0112.E1.O5Inspect work site, locate services, assess hazards and apply risk controls, including required signage and barricades.

0112.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Construct framework for eaves or soffits.

0112.E2.O1Determine eaves design from drawings and specifications and set out and fix framework.

0112.E2.O2Set out, mark and cut timber and steel framework members to lengths for framework structure.

0112.E2.O3Construct boxed eaves with soffit bearers and fix to line and level to wall frame or support by hangers from rafters/trusses.

0112.E2.O4Set-out and install eave supports.

E3Line and clad eaves and soffits.

0112.E3.O1Mark and cut eaves cladding and sheeting material to shape to suit task application and jointing methods.

0112.E3.O2Fit, join and fix eaves lining, cladding and soffits using methods for type of material and task application.

0112.E3.O3Fit and fix mouldings to finish eaves.

0112.E3.O4Fit raked eaves to rafters or framing.

E4Clean up.

0112.E4.O1Clean up, meeting all legislative and workplace requirements for safety, waste disposal and materials handling.

0112.E4.O2Check, maintain and store tools and equipment and rectify or report any faults.