Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Erect and dismantle jump form formwork

KHU-CON-0122

Australian Equivalent

CPCCCA3020

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to erect and dismantle jump-form formwork for concrete-pouring activities to construct wall structures where the formwork process is continuous, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. The unit includes curved and straight jump-form formwork, which is erected and then moved to its next position. Jump-form formwork requires work as a member of a mixed trades team, including carpenters, riggers, electricians, concreters and steel fixers. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the co

Elements & Learning Outcomes

E1Plan and prepare.

0122.E1.O1Read and interpret work instructions and plan sequence of work.

0122.E1.O2Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0122.E1.O3Select tools and equipment, check for serviceability and report any faults.

0122.E1.O4Select and use personal protective equipment (PPE) for each part of the task.

0122.E1.O5Inspect work site, locate services, assess hazards and apply risk controls, including required signage and barricades.

0122.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Set out formwork.

0122.E2.O1Locate set out points and lines to engineer’s drawings, survey datum points, and site drawings.

0122.E2.O2Locate jump-form formwork to set out.

E3Assemble core form system.

0122.E3.O1Erect and fix internal prefabricated system wall form shutters into location.

0122.E3.O2Fit system onto concrete nib walls at heights consistent with requirements.

0122.E3.O3Install shear key feet.

0122.E3.O4Fit platforms and assembly into core.

0122.E3.O5Fit structural steel system grid work and hydraulic hose lines.

0122.E3.O6Suspend wall form shutters and fit system cladding and platforms.

E4Locate and install penetrations.

0122.E4.O1Set out locations and dimensions of penetrations to designated tolerance.

0122.E4.O2Construct penetrations, block-outs and cast-in services.

0122.E4.O3Install penetrations.

E5Jump the formwork.

0122.E5.O1Erect and fix external prefabricated system wall shutters.

0122.E5.O2Loosen and strip shutters to manufacturers’ and WHS requirements.

0122.E5.O3Instruct rigger to activate electric or hydraulic jacking of the system to the new position.

0122.E5.O4Install trailing platforms.

0122.E5.O5Dismantle formwork.

E6Clean up.

0122.E6.O1Clean up, meeting all legislative and workplace requirements for safety, waste disposal and materials handling.

0122.E6.O2Check, maintain and store tools and equipment and report any faults.