Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Install curtain walling

KHU-CON-0123

Australian Equivalent

CPCCCA3022

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to fit and fix curtain walling facades to multi-storey structures to provide external cladding of structural steel or reinforced concrete, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. The unit includes the installation of fabricated frameworks with metal cladding, fabricated framework with glass panels, precast concrete panels, and manufactured and natural stone products in or on the structure. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No

Elements & Learning Outcomes

E1Plan and prepare.

0123.E1.O1Read and interpret work instructions and plan sequence of work.

0123.E1.O2Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0123.E1.O3Select tools and equipment, check for serviceability and report any faults.

0123.E1.O4Select and use personal protective equipment (PPE) for each part of the task.

0123.E1.O5Inspect work site, locate services, assess hazards and apply risk controls, including required signage and barricades.

0123.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Prepare site for installation.

0123.E2.O1Set out location of curtain wall installation connections.

0123.E2.O2Clear area below construction face to allow operation of support plant and equipment and isolate with barricades to work health and safety (WHS) requirements.

0123.E2.O3Inspect surface of structure to receive curtain walling for conformity and prepare to receive fixings.

E3Install panels or cladding.

0123.E3.O1Check and install curtain wall fixing brackets to set out points.

0123.E3.O2Place and fix curtain walling into correct position.

0123.E3.O3Install curtain walling plumb and level, align and fix into position.

0123.E3.O4Fit and secure junctions between placed sections of curtain walling to fixing specifications.

0123.E3.O5Install curtain wall trims.

E4Seal curtain walling.

0123.E4.O1Clean surface areas in preparation for application of caulking sealants.

0123.E4.O2Apply sealants to curtain walling and trims.

E5Clean up.

0123.E5.O1Clean up, meeting all legislative and workplace requirements for safety, waste disposal, materials handling and protection of the environment.

0123.E5.O2Check, maintain and store tools and equipment and report any faults.