Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Install lining, panelling and moulding

KHU-CON-0124

Australian Equivalent

CPCCCA3024

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to prepare, set out and install lining and panelling to masonry and timber and/or metal framed walls, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. The unit includes installation of mouldings to provide decorative finishes. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0124.E1.O1Read and interpret work instructions and plan sequence of work.

0124.E1.O2Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0124.E1.O3Select tools and equipment, check for serviceability and report any faults.

0124.E1.O4Select and use personal protective equipment (PPE) as required for each stage of the task.

0124.E1.O5Inspect work site, locate services, assess hazards and apply risk controls, including required signage and barricades.

0124.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Prepare surface for lining/panelling.

0124.E2.O1Select fixing procedures for lining materials.

0124.E2.O2Set out surface to provide a balanced panel or board effect to width and height.

E3Install lining/panelling.

0124.E3.O1Mark lining materials and cut to length and/or shape, fit and position.

0124.E3.O2Secure and fix panelling/lining.

0124.E3.O3Install panelling/lining to plumb, level and uniform plane.

E4Cut and fix profiled architrave mouldings.

0124.E4.O1Mark standard architraves for edging and cut to length, position and fit.

0124.E4.O2Mark skirtings and cut to length, position and fit.

0124.E4.O3Mark mitre joints, cut to length, position and fit flush to face and true without gaps.

0124.E4.O4Mark scribed joints and cut to length, position and fit.

0124.E4.O5Cut scotia return end to profile shape and length.

0124.E4.O6Mark standard pelmet moulding to length and cut, fit, assemble and fix with mitres true without gaps.

0124.E4.O7Set out raked moulding to position and shape mould to pattern for each position.

E5Clean up.

0124.E5.O1Clean up meeting all legislative and workplace requirements for safety, waste disposal and materials handling.

0124.E5.O2Check, maintain and store tools and equipment and report any faults.