Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Manufacture components for doors, windows and frames

KHU-CON-0177

Australian Equivalent

CPCCJN3003

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to manufacture components for doors, windows and frames, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0177.E1.O1Read and interpret work instructions and plan sequence of work.

0177.E1.O2Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0177.E1.O3Select tools and equipment, check for serviceability and report any faults.

0177.E1.O4Select and use personal protective equipment (PPE) for each part of the task.

0177.E1.O5Inspect workplace, assess hazards and apply risk controls, including required signage and barricades.

0177.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Dress materials.

0177.E2.O1Check machines and cutting tools for safe and effective operation.

0177.E2.O2Adjust machine settings for task requirements.

0177.E2.O3Position and cut material, check for quality and rectify faults.

E3Shape materials.

0177.E3.O1Check spindles, cutting tools and jigs for safe and effective operation.

0177.E3.O2Adjust spindle machine settings for task requirements.

0177.E3.O3Feed material into machine and operate machine to shape material.

E4Join materials and produce components.

0177.E4.O1Set out materials for joining.

0177.E4.O2Check joining machines, cutting tools and jigs for safe and effective operation.

0177.E4.O3Adjust joining machine settings for task requirements.

0177.E4.O4Operate machine to produce joints.

E5Finish components and prepare for assembly.

0177.E5.O1Check finishing and sanding machines for safe and effective operation and adjust for task requirements.

0177.E5.O2Dry-assemble components, check for quality and consistency, and rectify faults.

0177.E5.O3Sand and finish components, check for quality and consistency, and rectify faults.

E6Clean up.

0177.E6.O1Clean up, meeting all legislative and workplace requirements for safety, waste disposal and materials handling.

0177.E6.O2Clean, check, maintain and store machines, tools and equipment and report any faults.