Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Carry out levelling operations

KHU-CON-0207

Australian Equivalent

CPCCOM3006

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to carry out levelling operations to establish correct and accurate set-out of buildings and components, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. It includes: using the rise and fall and height of collimation methods setting up, testing and using levelling devices undertaking closed and open traverses using a range of levelling equipment calculating distances using stadia lines. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, l

Elements & Learning Outcomes

E1Plan and prepare.

0207.E1.O1Read and interpret work instructions and plan sequence of work.

0207.E1.O2Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0207.E1.O3Select tools and equipment, including personal protective equipment (PPE), check for serviceability and report any faults.

0207.E1.O4Fit PPE correctly.

0207.E1.O5Inspect work site, assess hazards and services, and apply risk controls, including required signage and barricades.

0207.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

0207.E1.O7Confirm team roles and verbal and non-verbal communication signals.

E2Carry out levelling procedures using rise and fall method.

0207.E2.O1Set up and test instrument for operational effectiveness and accuracy.

0207.E2.O2Set up or locate datum point.

0207.E2.O3Take and record readings from the datum and at nominated or selected stations following project specifications.

0207.E2.O4Identify backsights, intermediate sights and foresights, and book levels.

0207.E2.O5Transfer instrument to another location, repeat process, and record change station and record readings.

0207.E2.O6Calculate reduced levels for all stations using rise and fall method, and check accuracy of recordings using the three-check method.

E3Carry out levelling procedures using height of collimation method.

0207.E3.O1Set up and test instrument for operational effectiveness and accuracy, and check tolerances.

0207.E3.O2Set up or locate datum point.

0207.E3.O3Take and record readings to datum and establish the height of collimation.

0207.E3.O4Take readings at nominated or selected stations following project specifications, and record in field book.

0207.E3.O5Transfer instrument to another location, establish new height of collimation, and record change station in field book.

0207.E3.O6Calculate reduced levels using height of instrument method.

0207.E3.O7Calculate reduced levels for all stations and record heights and levels in field book.

0207.E3.O8Check accuracy of readings using height of collimation method of calculation and three check method.

E4Calculate distances using stadia lines.

0207.E4.O1Calculate distances from instrument to stations using staff, stadia lines, and identified factor of levelling instrument

0207.E4.O2Record readings and distances.