Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Construct tilt panels on site

KHU-CON-0218

Australian Equivalent

CPCCON3048

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to work in a team to set up, pour and place concrete tilt panels to form internal and external walls for building structures. It includes on-site and prefabricated methods of panel construction. A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction. Licensing, legislative, regulatory or certification requirements apply to this unit of competency in some states and territories. For further information, check with the relevant regulatory authority. Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work , is required by anyone carrying out construction work. Achievement of CPCWHS1001 Prepare to work safely in the constru

Elements & Learning Outcomes

E1Plan and prepare to construct tilt panels on site.

0218.E1.O1Interpret tilt panel design specifications and drawings and clarify construction requirements with relevant persons.

0218.E1.O2Plan work tasks to comply with relevant legislation, regulations, standards, codes, work health and safety (WHS), environmental and workplace requirements.

0218.E1.O3Select and fit required personal protective equipment (PPE).

0218.E1.O4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

0218.E1.O5Select plant, tools and equipment, check for serviceability and rectify or report any faults.

0218.E1.O6Calculate and acquire material quantities to meet task specifications and safely locate materials ready for use.

E2Set out and construct temporary casting bed.

0218.E2.O1Select suitable area to construct casting bed in accordance with work instructions.

0218.E2.O2Prepare ground to a flat surface in readiness for casting bed.

0218.E2.O3Place and finish casting bed to meet work instructions.

0218.E2.O4Coat casting bed with bond breaker in accordance with product specifications.

E3Set out work and prepare formwork for panel.

0218.E3.O1Set out location and size of tilt panel in accordance with drawings and specifications.

0218.E3.O2Prepare, place and fix tilt panel edge formwork, and plumb and align to specifications.

0218.E3.O3Apply bond breaker to casting bed face or casting form face of previous panel to ensure ease of panel separation, in accordance with manufacturer requirements for dose and quantity.

0218.E3.O4Apply form release agent to formwork in accordance with specifications.

E4Place and tie reinforcement and cast-in fittings

0218.E4.O1Check reinforcement, accessories and cast-in fittings for conformity with design and engineering specifications.

0218.E4.O2Position reinforcement, accessories and cast-in fittings in accordance with engineering drawings and specifications.

0218.E4.O3Tie reinforcement in correct placement in accordance with engineering drawings and specifications.

E5Place, finish and cure concrete.

0218.E5.O1Place concrete evenly and consolidate to specification using approved vibration method.

0218.E5.O2Screed and finish concrete surface to specification ensuring cast-in fittings are clear.

0218.E5.O3Apply required curing process.

0218.E5.O4Strip edge formwork after final panel is cast, ensuring no damage to panels.

E6Clean up.

0218.E6.O1Clear work area and dispose of, reuse or recycle materials in accordance with regulatory and workplace requirements.

0218.E6.O2Clean, check, maintain and store plant, tools and equipment in accordance with manufacturer and workplace requirements.