Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Install suspended ceilings

KHU-CON-0376

Australian Equivalent

CPCCWC3004

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to install exposed and concealed suspended ceilings. It includes setting out and installing ceiling suspension systems and installing lining material. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0376.E1.O1Read and interpret work instructions and plan sequence of work.

0376.E1.O2Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, and workplace requirements.

0376.E1.O3Select and use personal protective equipment (PPE) for each stage of the task.

0376.E1.O4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

0376.E1.O5Select tools and equipment, check for serviceability and report any faults that may affect the safe operation of the equipment, tag equipment and set aside.

0376.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Install suspension system.

0376.E2.O1Set out ceiling grid and alignment levels for ceiling.

0376.E2.O2Fix suspension rods to underside of soffit and structural members with masonry anchors, bolts and screws at prescribed centres.

0376.E2.O3Assemble suspended framework and connect to suspension rods.

0376.E2.O4Fasten suspension system, check for looseness and rattles, and secure as required.

0376.E2.O5Fix bridging framework to both sides of service ducts to support suspension system.

E3Install lining materials.

0376.E3.O1Install lining materials according to design pattern set out in job drawings.

0376.E3.O2Cut edges of lining materials and conceal to match pre-finished edges.

0376.E3.O3Provide openings and penetrations as shown in job drawings.

0376.E3.O4Fix trims and beads at junctions with other building elements and surfaces.

E4Clean up.

0376.E4.O1Clear work area and dispose of, reuse or recycle materials.

0376.E4.O2Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications.