Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Remove temporary supports from prefabricated concrete elements

KHU-CON-0525

Australian Equivalent

CPCPRE2002

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to remove temporary bracing and propping supports from prefabricated concrete elements. It requires using appropriate tools, equipment, materials and working in a team environment to remove temporary supports. A person who has achieved this unit of competency would be expected to follow safety regulations and relevant specifications. Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. Licensing, legislative, regulatory or certification requirements apply to this unit of competency in some states and territories. For further information, check with the relevant regulatory aut

Elements & Learning Outcomes

E1Access the requirements to remove temporary supports from prefabricated concrete elements.

0525.E1.O1Check the erection design documentation, review task specifications and seek written approval of the project design engineer for the removal of temporary supports from relevant personnel.

0525.E1.O2Review work health and safety (WHS) requirements for the task in accordance with safety plans and policies.

0525.E1.O3Conduct working at heights risk assessment and follow appropriate WHS processes.

0525.E1.O4Identify safety signage and barricade requirements.

0525.E1.O5Review environmental requirements for the task in accordance with environmental plans and legislative requirements.

0525.E1.O6Access plant, tools and equipment required to carry out task.

0525.E1.O7Verify the location of prefabricated concrete elements in accordance with design documentation.

E2Prepare to remove temporary supports from prefabricated concrete elements.

0525.E2.O1Erect identified safety signage and barricade requirements, and fit personal protective equipment (PPE).

0525.E2.O2Obtain plant, tools, equipment, check for serviceability and rectify or report any faults.

0525.E2.O3Ensure the structural work is complete and that written approval from the in-service design engineer has been obtained so that removal of temporary supports can commence.

E3Conduct the removal of temporary supports from prefabricated concrete elements.

0525.E3.O1Review the approved removal plan and access information on job sequencing and team roles.

0525.E3.O2Assemble and erect lifting/handling devices for movement of loads.

0525.E3.O3Follow load slinging and shifting requirements and conduct removal activity in accordance with erection design documentation, job safety and environmental analysis (JSEA) and safe work method statement (SWMS).

0525.E3.O4Maintain stability of the braces and props during lifting and transportation.

0525.E3.O5Systematically remove braces and associated parts from prefabricated concrete elements and footings in accordance with the erection design documentation, the JSEA and SWMS.

0525.E3.O6Systematically dismantle and remove props and associated parts from prefabricated concrete elements in accordance with the erection design documentation, the JSEA and SWMS.

E4Clean up.

0525.E4.O1Clear work area and dispose of, reuse or recycle materials in accordance with regulatory and workplace requirements.

0525.E4.O2Clean, check, maintain and store tools and equipment in accordance with manufacturer and workplace requirements.